Salt Remover Protector PTEF Kit (Suitable for Salt Water Engine Flush)

Model:
MM260880 (Salt Remover Protector Concentrate 1 L)
MM260890 (Salt Remover Applicator ONLY)
MM260865 (SALT REMOVER PROTECTOR KIT - 1L Concentrate PTEF & Applicator)



MM260880 - 1L SALT REMOVER PROTECTOR concentrate with PTEF (Protective Polymer Barrier Coating)
● Removes salt deposits and provides a protective PTEF barrier coat.
● PTEF polymers bond to surface for long-lasting protection.
● The most effective way to remove salt deposits from fishing tackle, dive gear, railings and decks.
● Engine Flush, Cleaner & Corrosion exhibitor.

MM260890 (Salt Remover Applicator ONLY)
● Use as a motor flush in I/O and outboard engines. 
● Allows easy application of Salt Remover to all metal surfaces or to flush an engine.
● Reservoir attaches between garden hose and either engine flusher or spray nozzle.
● On/Off Switch to control flow of water or Salt Remover to surface being treated.

MM260865 (SALT REMOVER PROTECTOR KIT - 1L Concentrate PTEF & Applicator)
Consists of both MM260880 & MM260890 (above) to make kit.

MM260865-SA37615 (SALT REMOVER PROTECTOR KIT - 1L Concentrate PTEF & Applicator)
Consists of both MM260880, MM260890 & SA37615 (Large Dual Flusher) to make kit.

Directions of use:

To remove salt deposits from exterior marine surfaces, trailers, dive gear, fishing rods & reels: Fill dispenser cup from the Salt Off® applicator (94100) with Salt Off® Concentrate. Attach one end of applicator to a garden hose and the other end to a trigger-type watering nozzle. Ensure black knob on the applicator is in the “On” position and the blue knob is in the “Mixture” position. Thoroughly saturate all surfaces that need to be treated, allowing Salt Off® to soak in for 5 to 10 minutes. Stubborn deposits may require light brushing. Rinse with fresh water and allow treated surfaces to air dry.

To treat items by immersing: Add 2 to 4 fl. oz. of Salt Off® Concentrate per 1 gallon of fresh water. Immerse item to be treated for several minutes, rinse with fresh water and allow to air dry.

To flush inboard and outboard engines: Fill Dispenser Cup with Salt Off® Concentrate. Attach one end of applicator to a garden hose and the other end to a flushing unit designed for your engine type. Ensure black knob on the applicator is in the “On” position and the blue knob is in the “Water Only” position. Run the engine to reach normal operating temperature. Once operating temperature has been reached, turn off the engine and turn the blue knob to “mixture” and verify the solution is flowing. Restart the engine and allow the engine to run until dispenser cup is clear, and the product has been used up. Salt Off®’s coating will protect the engine against future rust and corrosion.

NOTE: Do not store Salt Off® in applicator when not in use.