Free Shipping on orders over $149.90 (Terms & Conditions Apply)

24v 500 GPH/1,860 LPH NON-Automatic Marine Bilge Pump
24v 500 GPH/1,860 LPH NON-Automatic Marine Bilge Pump

24v 500 GPH/1,860 LPH NON-Automatic Marine Bilge Pump

Regular price
Sale price
Quantity must be 1 or more

Model: LA-MA-802

Next generation compact submersible 500 GPH electric pump for use as a bilge or bait pump on smaller craft.

Totally submersible pump with water cooled, ignition and TCO protected motor, stainless steel shaft and snap-on strainer base. This pump is extemely efficient, draws low current and offers high capacity output in a very compact housing, to fit into the smallest available space.

NON-Automatic pump - requires a Rule float switch to operate automatically.

Please note - using the included check valve will reduce the output flow of the pump.

Available in 24 volt only.

3 year limited warranty.

Quick Product Specs:

    • Fully submersible pump - 500 US gallons per hour - 31 litres per minute @12v
    • Higher flow - optimised impeller to provide greater flow at the same amperage as previous model
      High efficiency, low amp draw ignition protected motor includes true Electromagnetic suppression (EMC)
    • 16 gauge tin coated copper electrical wiring with silicone infused water blocking feature - to stop water wicking down inside the wiring
    • Built-In thermal cut-out (TCO) in the motor provides additional protection for pump & vessel
    • Backflow prevention - now includes a removable check valve in the discharge nozzle which reduces the amount of water draining back from the pump discharge hose into the bilge.
    • Please note - using the check valve will reduce the rated output flow.
    • Threaded discharge port - gives easier installation and maintenance.
    • Discharge hose port is included with each pump
    • Hidden air vents in the pump prevent air locking in challenging plumbing installations and helps with the check valve operation
    • Compact - 99mm Height x 74mm Width x 64mm depth - not including discharge
    • 1.6 amp draw @ 12v DC
    • Threaded hose outlet suits 20mm (3/4") hose. 1 x straight port provided.
    Voltage: 24V DC
    Dimensions: 99mm Height x 74mm Width x 64mm (excluding discharge)
    Amp Draw:24v @ 0.8Amps
    Outlet Hose Size: 20mm / 3/4"
    GPH Open Flow: 500 GPH / 1,860 Litres Per Hour

    1 x 24v Next Generation Rule 500 GPH / 1,860 LPH (Non Automatic) Bilge Pump
    1 x Straight Threaded Port