Free Shipping Australia-Wide for orders over $149.90. T&C's Apply.

12v Compact Fully Submersible Automatic Sensor Bilge Pump - 1,100GPH/4,140LPH
12v Compact Fully Submersible Automatic Sensor Bilge Pump - 1,100GPH/4,140LPH
12v Compact Fully Submersible Automatic Sensor Bilge Pump - 1,100GPH/4,140LPH

12v Compact Fully Submersible Automatic Sensor Bilge Pump - 1,100GPH/4,140LPH

Regular price
$199.90
Sale price
$199.90
Quantity must be 1 or more

Product Code: LA-MA-0398

All new version of the Rule-Mate fully automatic submersible bilge pumps offering more compact size with high performance & reliability.

The new Rule-Mate Automatic bilge pumps are packed with many improved and additional features that are no available in other brands of bilge pumps.

Specifications:
  • 100% Brand New Product in packaging
  • More compact size - only 2/3 the size of previous versions
  • Auto-sense intelligence fully automatic water level sensing
  • Fully automatic pump in 1 common compact housing
  • Pump and sensors are internally common wired for easy installation
  • No battery drain other than when the pump is in use
  • Optimised impeller design gives up to 10% higher flow than previous versions (at the same amperage)
  • Built-in thermal cut-out to protect the pump and the vessel
  • Supplied with backflow prevention - check valve in outlet port
  • Anti-Airlock design has hidden air vents in the pump booy
  • Safety back-up operating mode prevent continuous running if the sensor or impeller is fouled by debris
  •   Pump check feature - touch and hold for 5 second on the 'touch here' button the pump casing - to instantly check the operation of the pump.
Technical Specifications:
1,100 US Gallons Per Hour - 69 Litres Per Minute at open flow
790 US Gallons Per Hour - 49 Litres Per Minute at 1 Metre Head
3.8amp @12v, Fuse Size 7.5 Amp

The bilge pumps operated using an internal water level sensor. So that when the bilge water level reaches 62mm height, the pump will automatically activate, removing water from the bilge. When the water level goes down to 16mm height, the pump will automatically shut off until the water level rises again.
     
  • Threaded discharge nozzle for easier installation and maintenance
  • Removable strainer to access impeller area to clear any debris
  • A 3rd wire allows for manual over-ride using a Rule switch panel.
All pumps are the same physical size - 73mm depth x 112mm height. The length is 129mm to end of the threaded discharge nozzle and totals 165mm including the sew-on hose port.

The Actual Snap-in strainer mounting base footprint is 64mm x 57mm with a slightly oval shape.

Contents:
1 x 12v Automatic RuleMate Bilge Pump - 1,100GPH
1 x 20mm (3/4") Threaded Straight Hose Outlet