Free Shipping Australia-wide on orders over $199 (T&C's Apply).

12v 360 GPH/1,380 LPH NON-Automatic Marine Bilge Pump
12v 360 GPH/1,380 LPH NON-Automatic Marine Bilge Pump

12v 360 GPH/1,380 LPH NON-Automatic Marine Bilge Pump

Regular price
Sale price
Quantity must be 1 or more

100% Australian Business

Buy now, pay later!

Model: LA-MA-800

Next generation compact submersible 360 GPH electric pump for use as a bilge or bait pump on smaller craft.

Totally submersible pump with water cooled, ignition and TCO protected motor, stainless steel shaft and snap-on strainer base. This pump is extemely efficient, draws low current and offers high capacity output in a very compact housing, to fit into the smallest available space.

NON-Automatic pump - requires a Rule float switch to operate automatically.

Please note - using the included check valve will reduce the output flow of the pump.

Available in 12 volt only.

3 year limited warranty.

Quick Product Specs:

Fully submersible pump - 360 US gallons per hour - 23 litres per minute @12v
Higher flow - optimised impeller to provide greater flow at the same amperage as previous model
High efficiency, low amp draw ignition protected motor includes true Electromagnetic suppression (EMC)
16 gauge tin coated copper electrical wiring with silicone infused water blocking feature - to stop water wicking down inside the wiring
Built-In thermal cut-out (TCO) in the motor provides additional protection for pump & vessel Backflow prevention - now includes a removable check valve in the discharge nozzle which reduces the amount of water draining back from the pump discharge hose into the bilge. Please note - using the check valve will reduce the rated output flow.Threaded discharge port - gives easier installation and maintenance
Discharge hose port is included with each pump
Hidden air vents in the pump prevent air locking in challenging plumbing installations and helps with the check valve operation
Compact - 99mm Height x 74mm Width x 64mm depth - not including discharge
2.1 amp draw @ 12v DC
Threaded hose outlet suits 20mm (3/4") hose. 1 x straight port provided.

Voltage: 12V DC
Dimensions: 99mm Height x 74mm Width x 64mm (excluding discharge)
Amp Draw: 12v @ 2.1 Amps
Outlet Hose Size: 20mm / 3/4"
GPH Open Flow: 360 GPH / 1,380 Litres Per Hour

1 x 12v Next Generation Rule 360 GPH / 1,380 LPH (Non Automatic) Bilge Pump
1 x Straight Threaded Port